* Effects
can be applied on both input and output
* Effects are not available while sample rate is set to 192kHz
Built-in limiter, low-cut filter and studio class effects
An on-board limiter helps suppress sudden peaks in sound from
an input source. A low-cut filter is included to help prevent
things like wind noise or mic handling noise. Studio class effects
such as 3-Band EQ, 6-Band GEQ, Enhancer or DeEsser can be used
as tools to greatly improve audio quality. Effects can be applied
while recording or simply for monitoring/playback.
Pre-Record
function ensures you never miss that important moment again
The Pre-Record function buffers input signals for a user-definable
amount of time. When the REC button is pressed, the material from
the previous few seconds (selectable) is included. This also helps
reduce sound bites at the beginning of a recording by not having
to start the recorder too early.
Combo type
analog jacks and digital output enables connection with a variety
of devices
The combo input jacks (4) supports the connection of both XLR
and 1/4 inch plugs. XLR inputs are equipped with phantom power.
Eleven steps of input sensitivity enable the connection of various
devices with a variety of inputs levels from microphones to musical
instruments. High quality analog circuitry in the preamp ensures
superior recording results
High-contrast
Organic LED display and operation-oriented user interface
The high contrast, high response organic LED screen, viewable
from wide angles ensures fluid operation in field recording situations.
The high response of level meters makes precise level adjustments
possible. All the necessary switches and knobs are located on
the top and front panels. Self-lit buttons on all the key controls
enable clear-cut recording operations.
8ch_RECCapture
eight channels by linking two units
The Control Sync terminal enables synchronized operation of 2
units. Control the second unit from the master by simply connecting
two with a stereo mini cable. The master unit can remotely control
REC standby, REC start and REC stop of the slave unit. This function
enables 8-channel recording in a compact space and at an affordable
price.
Link to
computer via high speed USB
The R-44 storage can be mounted on computers with a simple USB
2.0 connection. It is seen as an USB storage device on any computer.
You can copy data back and forth with a simple drag & drop
operation.
Four hours
of recording with four AA batteries
The R-44 can be operated with 3 types of power: AC adapter and
AA batteries. Four hours* of operation is possible with NiMH or
alkaline batteries.
* at 16-bit/44.1kHz stereo. No phantom power and pre-record disabled.
Specifications
Recorder Section
- Channels
- 4
- Data
Type
- Format
: WAV/BWF
- Sampling
Bit Rate
- 16/24-bit
- Sampling
Frequency
- 44.1kHz/48kHz/88.2kHz/96kHz/192kHz
(Limited to Stereo x 1 at 192kHz) * 16 or 24-bit sampling rate
can be selected with any frequency
- Recording
Media
- SDHC /
SD memory card (compatible with 64 MB - 32 GB)
- Recording
Time using 8 GB SDHC card
- 16 bit/44.1kHz
: 755 minutes (Stereo), 377 minutes (4ch)
16 bit/48kHz : 694 minutes (Stereo), 347 minutes (4ch)
24 bit/48kHz : 462 minutes (Stereo), 231 minutes (4ch)
24 bit/96kHz : 231 minutes (Stereo), 115 minutes (4ch)
24 bit/192kHz : 115 minutes (Stereo)
* Recording times are approximate. Actual results may vary somewhat.
* If more than one recorded file exists, the total recordable
time will be less than listed.
Input and Output
- Analog
Input
- Ch 1 -
4 : XLR/TRS Combo type, XLR type (phantom powered)
- Analog
Output
- Ch 1 -
4 : XLR/TRS Combo type, XLR type (phantom powered)
- Digital
In/Out
- RCA Pin
type (IEC 60958-3)
- Input
Impedance
- XLR: 4k
ohms or greater (balanced), TRS: 6k ohms or greater (balanced)
- Nominal
Input Level
- 11 steps
: -56, -50, -44, -38, -32, -26, -20, -14, -8, -2, +4 (Input
Level Knob : Center)
- Maximum
Input
- +24 dBu
(Input Sens Knob: +4 dBu)
- Output
Impedance
- Line Output
: 600 ohms
- Recommended
Load Impedance
- Line :
4k ohms or greater
- Output
Level
- Line Output
: -20 dBu (fixed)
- Total
Harmonic Distortion + Noise
- Line Output
: 0.02 % (Input Sens : +4 dBu)
- Noise
Level
- Line Output
: -100 dBu (Input Sens : +4 dBu, Input Level : Center)
- Residual
Noise Level
- Line Output
: -103 dBu (Input Sens : +4 dBu, Input Level : Minimum)
- Frequency
Response
- 20Hz -
40kHz(0/-3 dB)
- Dynamic
Range
- AD : 100
dB
- Phantom
Power
- 48 V +
or - 4 V, 8 mA per 1 channel (20 mA or less in all channels)
Other Terminals
- USB
Port
- Mini-B
Type Connecter
- Control
Sync Jack
- Stereo
Mini Type Jack
Others
- Display
- 128 x 64
dot organic LED
- Power
Supply
- AC adaptor
(PSB-1U), AA type battery x 4 (Alkaline or NiMH)
- Current
Draw
- 1.2 A
System Requirements
- Microsoft®
Windows® Vista®/XP/2000, Mac OS X 10.2 or later
Size and Weight
- Width
- 157 mm
- 6-3/16
inches
- Depth
- 183 mm
- 7-1/4 inches
- Height
- 61 mm
- 2-7/16
inches
- Weight
- 1.3 KG
including batteries
- 2 lbs 14
oz including batteries
Specifications and/or appearance of this unit are subject to
change without prior notice.